This thesis deals in the theoretical part with the non-contact vibration measurement by single point Laser Doppler vibrometer and it concretes constructions used in practice. It deals also with the possibilities of the laser beam scanning to measure the vibrations in the plane and there are also listed suitable-commercial systems for this solution. Mentioned sweep is immediately necessary for 2D scanning vibrometer construction. In the practical part, the single-point laser vibrometer OFV-5000 was expanded by scanning galvo system, supplemented by a measuring cards for signal acquisition from the vibrometer and suitable control hardware was chosen for mentioned laser. For the resulting hardware assembly was designed and implemented in LabVIEW measurement software, to control the 2D scanning system, to set the position of the laser beam and to process and to visualize of measured vibration signals in the plane. The functionality of the developed measuring system was checked by performed measurement and visualization of the velocity vibration of restraint girder, excited by shaker.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219813 |
| Date | January 2012 |
| Creators | Rajm, Martin |
| Contributors | Klusáček, Stanislav, Havránek, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds