Two major problems in viscoelastic turbulence, the effects of polymers on the laminar-turbulent transition dynamics and the origin of the maximum drag reduction asymptote, can be both better understood in the regime near the margin of turbulence. In the first part of this thesis, direct numerical simulation trajectories initiated from the edge state are used to follow its unstable manifold into the turbulent basin. In Newtonian flow, the growth of turbulence starts with the intensification of velocity streaks and a sharp rise in the Reynolds shear stress. It is followed by a quick breakdown into high-intensity small-scale fluctuations before entering the core of turbulence. Adding drag-reducing polymers does not affect the initial growth of turbulence but stabilizes the primary streak-vortex structure, which help the flow circumvent the breakdown stage. Throughout the process, polymers act in reaction to the growing turbulence and do not drive the instability. This part not only reveals the transition dynamics into turbulence but also presents a comprehensive view of the bursting stage observed in the near-wall self-sustaining cycle, which starts as the flow leaves hibernating turbulence and is redirected towards the turbulent basin by the unstable manifold of the edge state.
On the other hand, this thesis also discusses the effects of polymer addition on the laminar-turbulent transition in extended domains. Localized turbulent spot can be clearly observed in the large box, and this turbulent region will spread as well as tend to “split” but finally fill up the whole domain before it is separated. Polymers do not affect the flow dynamics until the burst. Similarly, vortex structures rapidly break down into small scales after the first bursting of Reynolds shear stress, but polymer additives depress this process.
The thesis offers a clear and comprehensive overview of the transition into turbulence in the presence of drag-reducing polymers. Future work remains in two major directions. The first is to pinpoint the flow states responsible for the quantitative origin of the universal upper limit of drag reduction observed in experiments. The second is to determine the role, if any, of elasticity-driven instabilities in the transition. / Thesis / Master of Applied Science (MASc) / Turbulence exists everywhere and can be observed in most fluid flows occurring in nature. To reduce the energy consumption, frictional resistance in the turbulence must be considered in fluid transportation. It has been known since the 1940s that a small amount of long-chain polymer additives can dramatically reduce such drag. The mechanism of drag reduction has attracted extensive attention. Two problems of particular interest are the upper limit of drag reduction (termed maximum drag reduction) and the polymer effects on the laminar-turbulent transition. In this thesis, full transient trajectories from marginal turbulent states towards sustained turbulence in both Newtonian and polymeric flows are monitored by direct numerical simulations. It is observed that polymer additives do not affect the initial growth of turbulence but prevent flows from breaking into strong but small-scale fluctuations afterwards. In a more extended domain, turbulence starts as localized spots which spread across the channel. Adding polymers changes the dynamics of turbulence propagation as well. In addition to the aforementioned problems, this study also sheds lights on the so-called bursting events intermittent surges in turbulent activities observed in experiments.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/21348 |
| Date | 11 1900 |
| Creators | Bai, Xue |
| Contributors | Xi, Li, Chemical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0016 seconds