Numerical simulation is progressively taking importance in the design of an aero- nautical engine. However, concerning the particular case of cooling devices, the high number of sub-millimetric cooling holes is an obstacle for computational sim- ulations. A classical approach goes through the modelling of the effusion cooling by homogenisation. It allows to simulate a full combustor but failsin representing the jet penetration and mixing. A new approach named thickened-hole model was developed during this thesis to overcome this issue. A work on improving the mesh resolution onkey areas thanks to an automatic adaptive method is also presented, leading to a clear breakthrough. In parallel, as the flame tube temperature is a cornerstone for the combustor durability,a low-cost approach is proposed to predict it. To meet the time-constraints of design, it is based on thermal modelling instead of a direct thermal resolution.
| Identifer | oai:union.ndltd.org:univ-toulouse.fr/oai:oatao.univ-toulouse.fr:24294 |
| Date | 05 November 2018 |
| Creators | Bizzari, Romain |
| Contributors | Institut National Polytechnique de Toulouse - INPT (FRANCE) |
| Source Sets | Université de Toulouse |
| Language | English |
| Detected Language | English |
| Type | Thesis, NonPeerReviewed |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | http://oatao.univ-toulouse.fr/24294/ |
Page generated in 0.0016 seconds