This study deals with technology of abrasive water jet material cutting and influence of cutting head feed rate on surface topography of cut walls with regards to roughness. Eight parameters were chosen based on the CSN EN ISO 4288 standard representing quality of surface after AWJ cutting. When AWJ cutting the chosen material – commercially pure ASTM B265 grade 2 titanium – feed rate was being changed and in order to obtain information about each parameter´s distribution in various depths of the cut, surface composition was evaluated. It was found out that feed rate has significant influence on surface and that the profile elements´ width grows when increasing the feed rate and cut depth. Furthermore, two selected feed rate results were compared to laser beam technology and conclusion for the selected material was made that AWJ cutting is more preferable due to final roughness and no heat affect on the material.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228934 |
| Date | January 2010 |
| Creators | Pecháček, Martin |
| Contributors | Dvořák, Jaromír, Slaný, Martin |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds