The thesis primarily deals with the optimization of laser cutting center for coated aluminium sheet cutting and with the subsequent comparison of measured results and a sample made using waterjet cutting. The thesis is divided in two parts, the theoretical part followed by the practical one. The theoretical section is concerned with the unconventional technologies used, with their general analysis, design, history and utilization for industrial appliances. Main parts of this thesis deals with classification of particular cutting principles and their specific description. The theoretical part contains also classificaton of aluminium alloy, description of surface texture measurement and explanation of basics terms used for roughness measurement. The practical section is concerned with the particular task solution and with all knowledge used for optimization and evaluation of laser cutting. This part contains the measurement results, the measured material, the machines and devices used and also the technical and economical evaluation of this thesis content. The overall evaluation of the laser cutting optimization of specific component is mentioned in the experiment outcome evaluation article.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231521 |
| Date | January 2014 |
| Creators | Pokorák, Milan |
| Contributors | Hála, Michal, Mrňa, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds