Return to search

Investigation and development of oil-injection nozzles for high-cycle fatigue rotor spin test

Approved for public release, distribution is unlimited / Resonant excitation tests of rotor blades in vacuum spin pits using discrete oil jets showed that impact erosion of the blades could limit test times, but lower excitation amplitudes were produced using mist nozzles. Smaller diameter discrete jets might extend test times, but to fully prevent erosion, oil mist droplet size needed to be 30 microns or less. The present study examined both approaches. Prototype nozzles were developed to create 0.005 inch diameter multiple discrete jets using first alumina, then stainless steel tubing, laser and micro-machine drilling. The latter technique was selected and 50 were manufactured for evaluation in HCF spin tests. A vacuum test chamber was built to observe and photograph spray patterns from the prototype nozzles and from commercially available mist nozzles. An LDV system was used successfully to determine the velocity of the oil droplets within the mist. A complete mapping of mist nozzle sprays is required to allow routine design of blade excitation systems. / Lieutenant, United States Navy

Identiferoai:union.ndltd.org:nps.edu/oai:calhoun.nps.edu:10945/2216
Date03 1900
CreatorsMoreno, Oscar Ray
ContributorsShreeve, Raymond, Hobson, Garth, Naval Postgraduate School (U.S.)., Department of Mechanical and Astronautical Engineering
PublisherMonterey, California. Naval Postgraduate School
Source SetsNaval Postgraduate School
Detected LanguageEnglish
TypeThesis
Formatxvi, 95 p. : col. ill., application/pdf
RightsThis publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. As such, it is in the public domain, and under the provisions of Title 17, United States Code, Section 105, may not be copyrighted.

Page generated in 0.0018 seconds