This thesis relates a technique for increasing the optical strength of NaCl and KCl single-crystal samples. The 1.06-μm pulsed laser damage thresholds were increased by factors as large as 4.6 for a bulk NaCl single-crystal sample. The bulk laser damage breakdown threshold (LDBT) of the crystal was measured prior to and after heat treatment at 800*C using a Nd:YAG laser operating at 1.06 μm. Bulk and surface LDBTs were also studied on samples annealed at 400° C. These samples showed differences in damage morphology on both cleaved and polished surfaces, and the cleaved surfaces had improved damage thresholds. However, neither the polished surfaces nor the bulk showed improved threshold at the lower annealing temperature.
| Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc504009 |
| Date | 05 1900 |
| Creators | Franck, Jerome B. (Jerome Bruce) |
| Contributors | Soileau, M. J., Van Stryland, Eric W. |
| Publisher | North Texas State University |
| Source Sets | University of North Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | v, 26 leaves : ill., Text |
| Rights | Public, Franck, Jerome B. (Jerome Bruce), Copyright, Copyright is held by the author, unless otherwise noted. All rights reserved. |
Page generated in 0.0018 seconds