Aluminum (Al) and its alloys are widely used in various technological applications, mainly due to the excellent thermal conductivity, non-magnetic, ecofriendly, easy formability and good recyclability. However due to the inferior corrosion resistance its applications are hampered in various engineering sectors. Besides, the corrosion related failures such as leakage of gas from pipeline, catastrophic breakdown of bridges and fire accidents in processing plants further puts the human life in jeopardy. Within the United States over $ 400 billion dollars per year are spent over research to understand and prevent the corrosion related failures. Recently, the development of transition metal(TM) aluminides (AlxTMy, where, TM = Mo, W, Ta, Nb, Cr, Zr and V) has received the global attention mainly due to high strength at elevated temperatures, light-weight, excellent corrosion and wear resistance. In light of this, surface modification via laser surface alloying (LSA) is a promising engineering approach to mitigate the corrosion and wear problems. In the present study the attempts are made to study the Al-Mo, Al-W, Al-Nb, and Al-Ta systems as a potential corrosion resistant coatings on aluminum. The refractory metal (Mo, W, Nb, Ta) precursor deposit was spray coated separately on aluminum substrate and was subsequently surface alloyed using a continuous wave diode-pumped ytterbium laser at varying laser energy densities. Microstructural analysis was conducted using scanning electron microscopy and further X-ray diffractometry was carried out to evaluate the various phases evolved during laser surface alloying. Corrosion resistance of laser alloyed coatings were evaluated using open circuit potential, cyclic potentiodynamic polarization, electrochemical impedance spectroscopy measurements were performed in 0.6 M NaCl solution (pH:6.9±0.2, 23˚C). Open circuit potential measurements indicate the more stable (steady state) potential values over long periods after laser surface alloying. Cyclic polarization results indicated reduction in the corrosion current density, enhancement in the polarization resistance, and increase in coating/protective efficiency with increase in laser energy density compared to untreated aluminum. Electrochemical impedance spectroscopy measurements also indicated an increase in charge transfer resistance after laser surface alloying of refractory metals on aluminum. Additionally, first principle calculations of thermodynamic, electronic and elastic properties of intermetallics evolved during LSA were also thoroughly investigated to correlate the corrosion performance of intermetallic coatings with these properties. The present study indicates that novel Al-Mo, Al-W, Al-Nb, and Al-Ta intermetallics has a great potential for light weight structural applications with enhanced corrosion resistance.
| Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc700029 |
| Date | 12 1900 |
| Creators | Rajamure, Ravi Shanker |
| Contributors | Srivilliputhur, Srinivasan Gopalan, Dahotre, Narendra B., Collins, Peter (Peter C.), Nasrazadani, Seifollah, Mukherjee, Sundeep |
| Publisher | University of North Texas |
| Source Sets | University of North Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | ix, 151 pages : illustrations (come color), Text |
| Rights | Public, Rajamure, Ravi Shanker, Copyright, Copyright is held by the author, unless otherwise noted. All rights reserved. |
Page generated in 0.0023 seconds