For the purpose of mechanical impact energy absorption in the transport industry are mainly used special profile absorbers. For highly specialized applications is required to use components that are designed for specific kind of deformation. Example of these parts are industrial-made metal foams or micro-lattice structures produced by SLM technology. This paper focuses on low-velocity dynamic loading prediction of BCC micro-lattice structure made of aluminum alloy AlSi10Mg by SLM technology (SLM 280HL). For this purpose dynamic FEM simulaton of the micro-lattice structure was developed, supplemented by model of BCC structure material obtained from mechanical testing. Real geometry of tested samples obtained from optical measurement (Atos Triple Scan III) was further implemented in the numerical model. Dynamic BCC structure load experiment was performed on a drop-weight tester. Behavior of structured material in drop-weight test was described by the course of deformation and reaction forces over time. Comparable results were obtained for flat loading of dynamic FEM simulation and experiment. Inclusion of production phenomena in simulation led to increased accuracy and compliance with experiment. Tool for testing the effect of geometry change on mechanical properties was created. To achieve more accurate results with puncture load, it is necessary to modify the material model with real material deformation at test sample failure.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:379040 |
| Date | January 2018 |
| Creators | Červinek, Ondřej |
| Contributors | Maňas, Pavel, Vrána, Radek |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds