One of the technical advances made by the lead-acid battery industry in the field of portable power supply was the development of the valve regulated lead-acid battery (VRLA). This battery reduced the necessity for periodic servicing in terms of having to replenish the cells with distilled water. Further, this new type of battery can now be installed near sensitive electronic equipment without the danger of acid spill or dangerous fumes being emitted. In addition, longer service performance is achieved in terms of life cycle capacity, when compared to the conventional flooded type batteries. However, the new type of battery requires the manufacturing of high precision electrodes and components with low tolerances for error. In order for the manufacturers to produce such a premium product, a thorough understanding of the electrochemistry of the inner components is necessary. None of the South African lead-acid battery manufacturers are currently making VRLA batteries to supply a very competitive global market, where a large range of sizes and capabilities are available. In order to introduce the VRLA battery into such a competing market in South Africa, a niche area for its application was identified in order to establish the viability of manufacturing such a battery locally. This is done by integrating the VRLA concept into an existing battery, such as the miners cap lamp (MCL) battery. Its application is specific with well-defined performance criteria in a relatively large consumable market in the South African mining industry. The study looked at various components within a local manufacturing environment that required a better understanding and modification of the processes to build VRLA MCL batteries. This included a detailed study of the manufacturing processes of the positive electrode. The study involved the investigation of the types of grid alloys used, the type of electrode design, such as tubular or flat plate, the addition of redlead to the paste mixing process and subjecting the batteries to accelerated life cycle testing. A better understanding of the oxygen recombination cycle was also performed in order to evaluate the correct use of certain design criteria in the manufacturing process. This included the study of the pressure release valve and the type of positive electrode used. The study also looked at developing an inexpensive analytical technique to evaluate the porosity of cured and formed electrodes using a glycerol displacement method. The monitoring of the state of health (SoH) of VRLA batteries on a continuous basis is an important parameter in unique applications such as remote power supply. A device was developed to monitor the SoH of VRLA batteries on a continuous basis. The working principle of the device was tested on a MCL VRLA battery. With the development of other types of VRLA batteries for specific applications such as in stand-by power supplies, the monitoring device would then be integrated in the battery design.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:10979 |
| Date | January 2004 |
| Creators | Ferg, Ernst Eduard |
| Publisher | Port Elizabeth Technikon, Faculty of Science |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Doctoral, DTech (Chemistry) |
| Format | ix, 247 leaves, pdf |
| Rights | Nelson Mandela Metropolitan University |
Page generated in 0.014 seconds