The theoretical part of dissertation is devoted to familiarization with the process of assembly and soldering of PCBs. There are described the selected types of lead-free solder paste, the various procedures of flux deposition, where the greater part is focuses to the printing through template. Also, I analyze the different procedures shouldering and soldering. I focused mainly on the mechanical mounting of SMD components soldering with help convection reflow and soldering in the vapor. In the practical part is described the design of the test PCB, methodology of assembly PCB and soldering various technologies with predefined settings. The analysis of the results is done by a non-destructive x-ray method and destructive micro-cut method. The x-ray method detects the position and size of the voids in the solder. This information is used for faster processing of micro-cut. The micro-cut method is included in the analysis for a more detailed examination of the solder joint. At the end of the thesis, there is a summary of the recommendation that the setting of the manufacturing process increases the quality of the brazed joint.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:377344 |
| Date | January 2018 |
| Creators | Slavík, Pavel |
| Contributors | Macho, Tomáš, Valach, Soběslav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds