The master thesis deals with the computational simulation of cross-roll leveling of tubes with various degrees of thickness. Based on the Lagrange approach, a several FEM models of curved tube were developed and subsequently solved in ANSYS commercial software. Furthermore, a several models of curved tube were solved by algorithm based on the Euler approach created at UMTMB FME BUT. Based on the comparison of output parameters from both algorithms it was found that the output parameters are comparable to the d/D ratio (inner/outer diameter of the tube) = 0.43.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318738 |
| Date | January 2017 |
| Creators | Peter, Ondřej |
| Contributors | Šebek, František, Petruška, Jindřich |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds