When an anode electrode potential is larger than the lowest unoccupied molecular orbital (LUMO) of the electrolyte, Li-ions and electrolyte molecules will participate in reduction reactions on the anode surface and form a solid electrolyte interface (SEI) layer.
Active Li-ion consumption in the formation reactions is the main source of capacity loss (>50) and ageing in Li-ion batteries (LIBs).
Due to the fast-occurring and complex nature of the electrochemical processes, conventional experimental techniques are not a feasible approach for capturing and characterizing the SEI formation phenomenon.
The lack of experimental data and consequently the absence of potential parameters for crystal structures in this layer makes molecular dynamics~(MD) simulations inapplicable to it.
Also, due to the multi-component multi-layer structure of the SEI, the smallest system representing an SEI layer is too large for employing the principles of quantum mechanics~(QM), that traditionally work with much smaller system sizes.
Addressing this, this thesis presents a novel computational framework for coupling QM and MD calculations to simulate a system with the size limits of MD simulations independent of the experimental data.
The QM evaluates sub-atomic properties such as energy barriers against diffusion and employs seven new algorithms to estimate potential parameters as the input of the MD simulations. Then MD simulations forecast SEI's properties including density, Young's Modules, Poisson's Ratio, thermal conductivity, and diffusion coefficient mechanisms.
The output of the QM and MD calculations are employed to develop two macro-scale mathematical models for predicting battery ageing and battery performance, incorporating the impact of the SEI layer in addition to the cathode, anode, and separator parts.
Finally, the results obtained have been validated with respect to the experimental data in different operational conditions. / Thesis / Doctor of Philosophy (PhD) / The limited lifespan of expensive batteries is the main obstacle to electrification of the transport sector, despite its necessity for addressing the current environmental issues.
Li+/electrolyte reduction on the electrode surface is responsible for more than 50% of capacity loss and the consequent ageing is a complex and fast-occurring phenomenon (few ns) that cannot be easily resolved using conventional experimental and computational techniques. This thesis presents the development of some computational frameworks and demonstrates their employment to investigate this phenomenon from a multi-scale perspective, i.e., from a few electrons to an entire battery length scale, with the operating cycles ranging from a few ps to several months, employing Quantum Mechanics, Molecular Dynamics, and Macro-Scale Modeling. The frameworks have been successfully validated with respect to experimental data from the literature and have been applied successfully to highlight the parameters that impact ageing in batteries.
The findings presented in this thesis can be used as the base for further research on next-gen durable batteries with liquid and solid-state electrolytes.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/28659 |
| Date | January 2023 |
| Creators | Lanjan, Amirmasoud |
| Contributors | Seshasai, Srinivasan, Mechanical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0021 seconds