Return to search

Time Spectral Adjoint Based Design for Flutter and Limit Cycle Oscillation Suppression

When designing aircraft wings shapes, it is important to ensure that the flight envelope does not overlap with regions of flutter or Limit Cycle Oscillation (LCO). A quick assessment of these dynamic aeroelastic for various design candidates is key to successful design. Flutter based design requires the sensitivity of flutter parameters to be known with the respect of design parameters. Traditionally, frequency domain based methods have been used to predict flutter characteristics and its sensitivity. However, this approach is only applicable for linear or linearized models and cannot be applied to systems undergoing LCO or other nonlinear effects. Though the time accurate approach can be implemented to overcome this problem, it is computationally expensive. Also, the unsteady adjoint formulation for sensitivity analysis, requires the state and adjoint variables to be stored at every time step, which prohibitively increases the memory requirement. In this work, these problems have been overcome by implementing a time spectral method based approach to compute flutter onset, LCOs and their design sensitivities in a computationally efficient manner. The time spectral based formulation approximates the solution as a discrete Fourier series and directly solves for the periodic steady state, leading to a steady formulation. This can lead to the time spectral approach to be faster than the time accurate approach. More importantly, the steady formulation of the time spectral method also eliminates the memory issues faced by the unsteady adjoint formulation. The time spectral based flutter/LCO prediction method was used to predict flutter and LCO characteristics of the AGARD 445.6 wing and pitch/plunge airfoil section with NACA 64A010 airfoil. Furthermore, the adjoint based sensitivity analysis was used to carry out aerodynamic shape optimization, with an objective of maximizing the flutter velocity with and without constraints on the drag coefficient. The resulting designs show significant increase in the flutter velocity and the corresponding LCO velocity profile. The resulting airfoils display a greater sensitivity to the transonic shock which in turn leads to greater aerodynamic damping and hence leading to an increase in flutter velocity. / Doctor of Philosophy / When designing aircrafts, dynamic aeroelastic effects such as flutter onset and Limit Cycle Oscillations need to considered. At low enough flight speeds, any vibrations arising in the aircraft structure are damped out by the airflow. However, beyond a certain flight speed, instead of damping out the vibrations, the airflow accentuates these vibrations. This is known as flutter and it can lead to catastrophic structural failure. Hence, during the aircraft design phase, it must be ensured that the aircraft would not experience flutter during the flight conditions. One of the contribution of this work has been to come up with a fast and accurate method to predict flutter using computational modelling.

Depending on the scenario, it is also possible that during flutter, the vibrations in the structure increase to a certain amplitude before leveling off due to interaction of non-linear physics. This condition is known as limit cycle oscillation. While they can arise due to different kinds of non-linearities, in this work the focus has been on aerodynamic non-linearities arising from shocks in transonic flight conditions. While limit cycle oscillations are undesirable as they can cause structural fatigue, they can also save the aircraft from imminent structural fracture and hence it is important to accurately predict them as well. The main advantage of the method developed in this work is that the same method can be used to predict both the flutter onset condition and limit cycle oscillations. This is a novel development as most of the traditional approaches in dynamic aeroelasticity cannot predict both the effects.

The developed flutter/LCO prediction method has then been used in design with the goal of achieving superior flutter characteristics. In this study, the shape of the baseline airfoil is changed with the goal of increasing the flutter velocity. This enables the designed system to fly faster without addition of weight. Since the design has been carried out using gradient based optimization approach, an efficient way to compute the gradient needs to be used. Traditional approaches to compute the gradient, such as Finite Difference Method, have computational cost proportional to the number of design variables. This becomes a problem for shape design optimization, where a large number of design variables are required. This has been overcome by developing an adjoint based sensitivity analysis method. The main advantage of the adjoint based sensitivity analysis is that it its computational cost is independent of the number of design variables, and hence a large number of design variables can be accommodated. The developed flutter/LCO prediction and adjoint based sensitivity analysis framework was used to carry out shape design for a pitch/plunge airfoil section. The objective of the design process was to maximize the flutter onset velocity with and without constraints on drag. The resulting optimized airfoils showed significant increase in the flutter velocity.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/98574
Date27 May 2020
CreatorsPrasad, Rachit
ContributorsAerospace and Ocean Engineering, Choi, Seongim Sarah, Canfield, Robert A., Ha, Dong S., Patil, Mayuresh J.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeDissertation
FormatETD, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0024 seconds