A magnetic fluid system could potentially replace mechanically moving parts in a satellite as a means of increasing system reliability and mission lifetime, but rather than a standard ferrofluid with magnetic particles, liquid oxygen (LOX) may be a more adequate working fluid. As a pure paramagnetic cryogen, LOX is already heavily used in space, but still requires basic research before being integrated into system development. The objectives of the research conducted were to verify LOX as a magnetic working fluid through experiment and establish a theoretical model to describe its behavior. This dissertation presents the theoretical, experimental, and numerical results of a slug of LOX being pulsed by a 1.1 T solenoid in a quartz tube with an inner diameter of 1.9 mm. The slug oscillated about the solenoid at 6-8 Hz, producing a pressure change of up to 1.2 kPa. System efficiency based on the Mason number was also studied for various geometric setups, and, using a one-dimensional, finite-differenced model in Matlab 2008a, the numerical analyses confirmed the theoretical model. The research provides groundwork for future applied studies with complex designs.
Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-1686 |
Date | 01 May 2010 |
Creators | Boulware, Jeffrey C. |
Publisher | DigitalCommons@USU |
Source Sets | Utah State University |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | All Graduate Theses and Dissertations |
Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.0015 seconds