This research examines different techniques and proposes a Computational Fluid Dynamics (CFD) model as a robust tool for flow characterization of load leveling valves. The load leveling valve is a critical component of an air suspension system since it manages air spring pressure, a key function that directly impacts vehicle dynamic performance in addition to maintaining a static ride height. Efficiency of operation of a load leveling valve is established by its flow characteristics, a metric useful in determining suitability of the valve for application in a truck-suspension configuration and for comparison among similar products. The disk-slot type load leveling valve was chosen as the subject of this study due to its popularity in the heavy truck industry. Three distinct methods are presented to model and evaluate flow characteristics of a disk-slot valve. First is a theoretical formulation based on gas dynamic behavior through an orifice; second is an experimental technique in which a full pneumatic apparatus is used to collect instantaneous pressure data to estimate air discharge; and third is a CFD approach. Significant discrepancies observed between theoretically estimated results and experimental data suggest that the theoretical model is incapable of accurately capturing losses that occur during air flow. These variations diminish as the magnitude of discharge coefficient is altered.
A detailed CFD model is submitted as an effective tool for load leveling valve flow characterization/analysis. This model overcomes the deficiencies of the theoretical model and improves the accuracy of simulations. A 2-D axisymmetric approximation of the real fluid domain is analyzed for flow characteristics using a Realizable k-ϵ turbulence model, scalable wall functions, and a pressure-based coupled algorithm with a second order discretization function. The CFD-generated results were observed to be in agreement with the experimental findings. CFD is found to be advantageous in the evaluation of flow characteristics as it furnishes precise data without the need to experimentally evaluate a physical model/prototype of the valve, thereby benefitting suspension engineers involved in the development and testing of load leveling valve designs. This document concludes with a sample case study which uses CFD to characterize flow in a modified disk-slot load leveling valve, and discusses the results in light of application on a heavy truck. / MS / A majority of heavy trucks in North America equipped with air suspensions use a device known as a load leveling valve. This is a mechanical control system which manages pressure in air springs to maintain a preset/constant static ride height irrespective of the payload, doing so by sensing the distance between the truck frame and the axle. The rate of airflow to/from air springs in response to a road disturbance or load shift is critical to the stability of the truck when on the road. This rate of airflow for a given set of conditions constitutes flow characteristics of a load leveling valve. Accurate measurement of flow characteristics is necessary to understand the actual effect of the use of a particular valve on a truck-suspension configuration. This research addresses that requirement by presenting three distinct methods to model and evaluate flow characteristics of a load leveling valve, conducted on the disk-slot valve for its popularity in the heavy truck industry. First is a theoretical formulation based on flow of gas through an orifice; second is an experimental technique in which a full pneumatic apparatus is used to collect instantaneous pressure data to estimate air discharge; and third is a Computational Fluid Dynamics (CFD) approach. Significant discrepancies observed between theoretically estimated results and experimental data suggest that the theoretical model is incapable of accurately capturing losses that occur during air flow. The disparities also justify the adoption of CFD as an alternate method.
A comprehensive CFD model is proposed as a capable tool for load leveling valve flow analysis/characterization. This model overcomes the deficiencies of the theoretical model and improves the accuracy of simulations. CFD-generated results are found to be in agreement with the experimental findings, highlighting its effectiveness at flow characterization. The ability of a CFD model to furnish precise data without the need to experimentally evaluate a physical model/prototype of the valve promises to benefit suspension engineers involved in the development and testing of load leveling valve designs. This document concludes with a sample case study which uses CFD to characterize flow in a modified disk-slot valve, and discusses the results in light of application on a heavy truck.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/95880 |
| Date | 04 June 2018 |
| Creators | Gupta, Yashvardhan |
| Contributors | Mechanical Engineering, Ahmadian, Mehdi, Southward, Steve C., Dancey, Clinton L. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0022 seconds