This thesis presents the results of a research project to investigate the behaviour of the two components of a reverse channel connection to concrete filled tubular sections: the reverse channel and the steel tubular section, at both ambient and elevated temperatures. This research forms part of a European Union funded project on the robustness of joints to composite columns under fire conditions. The specific objectives of this research are to develop methods of quantifying the load-deformation behaviour at various temperatures of the two components. This research has been carried out through a combination of experiments, numerical simulations and analytical developments. Two series of tests have been carried out at different elevated temperatures, one for the reverse channels with lateral loads to the web applied as tensile loads through bolts and one for the concrete filled tubular sections under lateral loads applied through two steel plates (simulating the legs of a reverse channel) in the longitudinal direction of the section. These tests have been used to provide data for the validation of the numerical models based on using the general finite element package ABAQUS. The validated numerical models have been used to conduct a number of parametric studies to provide extensive data for the development of analytical methods to determine the load-deflection characteristics of the two components. For the reverse channel web, the load-deflection relationship consists of two parts and this research has developed analytical equations to predict initial stiffness, yield and ultimate resistance. The initial stiffness is based on extending and simplifying the Timoshenko solution for a plate under a block of lateral loads. The yield resistance is based on the yield line solution that the failure patterns were chosen based on the results attained from test and simulations. The ultimate resistance was calculated based on virtual work principle for the patterns considered in the yield resistance part. For the rectangular concrete filled tubular sections under lateral pulling forces applied through two plates, the load-deflection curve consists of two parts, depicting a linear phase followed by a nonlinear part. This research has developed expressions to calculate initial stiffness, yield resistance, and ultimate resistance. The initial stiffness is formulated according to the Timoshenko solution for a partially loaded plate. The yield resistance is determined by employing yield line solution for the yield patterns obtained from both the test and FE modelling. The ultimate resistance is evaluated by implementing the virtual work principle to the patterns considered in former part. The analytical load-deflection solutions have been compared with the numerical simulation and the experimental results and the agreement is generally satisfactory.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:603127 |
| Date | January 2013 |
| Creators | Jafarian, Mostafa |
| Contributors | Wang, Yong |
| Publisher | University of Manchester |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | https://www.research.manchester.ac.uk/portal/en/theses/behaviour-of-reverse-channel-connection-to-concrete-filled-hollow-tube-columns-under-fire-conditions(f60a80b2-a053-49d7-bbaf-22de4291a8e3).html |
Page generated in 0.0017 seconds