ABSTRACT
Two different implant impression materials viz. a polyether (Impregum ®) and a plaster (Plastogum ®) impression material were used and compared with respect to the accuracy with which abutment positions were reproduced from a stainless steel master model containing five implant analogues. Ten polyether impressions and ten plaster impressions were taken and cast in stone. The positions of the precision impression copings on the twenty impressions were measured using a Reflex Microscope. The positions of the implant analogues on the twenty casts were also measured and compared to the positions on the stainless steel master model. Statistical analysis indicated significant differences between the polyether impression and the plaster impression for full arch implant supported prostheses. The use of plaster resulted in smaller interabutment error but with less predictable variance in dimensions.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:wits/oai:wiredspace.wits.ac.za:10539/4503 |
| Date | 29 February 2008 |
| Creators | Von Berg, George Botha |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | 1093237 bytes, application/pdf, application/pdf |
Page generated in 0.0022 seconds