The main aim of this thesis is to define material parameters of Chaboche model of plasticity. Adjustment of the parameters has to correspond to the experimental datas. These datas are represented by an uniaxial strain controlled test curve for fewer than two cycles and also by cyclic stress-strain curve. After that, an cyclic tension-compresion test for various parameters of Chaboche´s model of plasticity is simulated in an ANSYS software. Finally, the most suitable configuration of Chaboche´s model of plasticity is used for cylindrical thick-walled body. Cylindrical body represents a simplified model of high-pressure tank of fuel (diesel) – rail in Common Rail system.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231183 |
| Date | January 2014 |
| Creators | Paraska, Boris |
| Contributors | Obdržálek, Vít, Vrbka, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds