<p>In this master degree work, a digital attenuator and a low noise amplifier (LNA) have been designed and integrated with the RF front-end receiver for IEEE 802.11b Wireless LAN standard. Firstly, the 4-bit digitally controlled attenuator has been designed with theattenuation range of 50 to 80 dB and reflection coefficient less than -25 dB. Next, the single stage wide band low noise amplifier with voltage gain larger than 14 dB and noise figure below 4 dB has been designed to operate at frequency 2.4 GHz. Finally, the integration with a down-conversion mixer has been done and evaluated its performance.</p><p>The attenuator and low noise amplifier desired in this thesis have been implemented using standard CMOS 0.35µm technology and validated by the simulation tools Cadence Spectre-RF.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-2642 |
| Date | January 2004 |
| Creators | Kantasuwan, Thana |
| Publisher | Linköping University, Department of Electrical Engineering, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
| Relation | LiTH-ISY-Ex, ; 3622 |
Page generated in 0.0016 seconds