The objective of this study is to investigate the effects of titanate coupling agents on low density polyethylene (LDPE) and polypropylene (PP) blends and composites in terms of their mechanical and morphological properties. PP and LDPE composites were produced separately in a Brabender internal mixer, and CaCO3 was used as inorganic filler with compositions of 20, 40 and 60 %. PP/LDPE blends were produced in a twin-screw extruder with ratios of 75/25, 50/50 and 25/75. Their composites were prepared with addition of untreated and titanate-treated CaCO3 at 20% filler content.
Titanate coupling agent which is appropriate for LDPE, PP and CaCO3 was used to improve the mechanical properties of the blends and composites. For this purpose, &ldquo / Lica 12&rdquo / which is a kind of neoalkoxy organotitanate was used. Two forms of Lica 12 were used: powder form (Capow L12) and pellet form (Caps L12).
Samples with and without titanate were prepared and then they were injection molded to make specimens for tensile and impact tests. Tensile fracture surfaces of samples were examined by scanning electron microscopy (SEM). Their mechanical and morphological properties were compared with each other to determine the effects of Lica 12.
This study showed that Capow L12 improved strain at break and impact strength of PP/CaCO3 composites and PP/LDPE blends containing 75% and 50% PP. The strain at break value of of PP75 composite with 20% titanate-treated filler increased significantly up to 509% which is the highest value among all blends and composites in this study. Capow L12 exhibited its functions in PP matrix much more effectively than in LDPE matrix.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12610135/index.pdf |
| Date | 01 December 2008 |
| Creators | Yilmaz, Gokhun |
| Contributors | Bayramli, Erdal |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0016 seconds