Return to search

Development of DVB-T RF Tuners

This thesis consists of two parts. Part one includes the design procedure and implementation of the building blocks for an RF tuner module used in the Digital Video Broadcasting ¡V Terrestrial ¡]DVB-T¡^system. It contains the comparison of several RF tuner architectures, frequency planning, and link-budget analysis. Measurement results for the designed tuner operating in the frequency range from 50 to 860 MHz show that the maximum power gain ranges from 49 to 57.6 dB. The entire range for gain control is over 60 dB. In the maximum gain state, the noise figure ranges form 6.8 to 11.5 dB, the output third-order interception point¡]OIP3¡^ranges from 11.7 to 13.8 dBm, and the image rejection is over 50 dB. By applying the simplified single-carrier modulation signals, the tuner can pass the DVB-T system specifications with respect to the adjacent-channel and overlapping-channel protection ratios.
In part two, an RFIC design for low-noise variable-gain amplifier that can be used in the RF front end of DVB-T system is presented. It operates from 100 to 900 MHz and dissipates 59.4 mW under a 3.3-V power supply. In the maximum gain state, measurement results for this RFIC show that the noise figure is less than 4 dB, the maximum gain is more than 14 dB, and the OIP3 is about 6.8dBm. The entire gain control range is over 40 dB.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0708104-224911
Date08 July 2004
CreatorsChou, Chih-Yuan
ContributorsTzong-Lin Wu, Huey-Ru Chuang, Sheng-Fuh Chang, Tzyy-Sheng Horng, Chih-Wen Kuo
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0708104-224911
Rightsunrestricted, Copyright information available at source archive

Page generated in 0.0019 seconds