Contact fatigue damages resulting either from static or dynamic contact are of interest for understanding the failure modes and mechanisms leading to improvement of the components’ performances in tribological applications. The objective of this research was to ascertain how and to what extent the counterface materials, loading conditions, contact configuration, lubrication, and the environment affect the failure behaviours of material under static and dynamic contact fatigue loading. An experimental ball-on-flat test configuration was employed for both static and dynamic contact fatigue testing. In house designed test rig was used to study static cyclic loading contact fatigue behaviours of brittle polymethylmethacrylate (PMMA) in contact with balls made of different materials, i.e. Si3N4, steel, aluminium, bronze and PMMA in dry and oil-lubricated conditions. A modified four ball test machine was used to study dynamic rolling contact fatigue behaviours of thermally sprayed molybdenum and titanium coatings in contact with steel balls in dry and seawater conditions. The static contact fatigue and the dynamic contact fatigue test results revealed that counterface material, loading magnitude, lubricant and the environment play a vital role in controlling failure modes and the extent of damage. In static contact fatigue, adhesive strength of the interface was the key factor controlling damage of the PMMA plate in both dry and oil-lubricated conditions. In dry conditions, three failure modes, i.e. adhesive wear, ring cracks, and radial cracks controlled the damage of PMMA to a different degree for each combination of materials. Whereas, the damage of each combination in oil-lubricated conditions was affected by the extent of three failure modes, i.e. adhesive wear, radial cracks and abrasive wear. In dynamic contact fatigue tests, adhesive wear and inter-lamellar cracking were the major failure modes controlling damage of molybdenum coating and titanium coating in dry contact conditions while abrasive wear, corrosion and lubrication controlled damage processes in seawater conditions.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:557686 |
| Date | January 2008 |
| Creators | Vongbandit, Pratip |
| Contributors | Stolarski, T. A. |
| Publisher | Brunel University |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://bura.brunel.ac.uk/handle/2438/3215 |
Page generated in 0.0017 seconds