The master thesis deals with the design and manufacture of tabbed joint in the profile with a square cross section using laser cutting. They examine their suitability and impact on the following MAG welding operation in terms of efficiency and accuracy. The theoretical part provides basic information about lasers used in industry and laser cutting methods. There is also a section dedicated to laser apparatus for tube cutting along with problematic about the laser cutting profiles. The experimental part describes the procedure of designing tabbed joint, making samples and measuring them. In the end, the individual samples are compared in terms of angular deflection after welding. The thesis also contains a technical-economic evaluation, where the costs of individual operations are quantified.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:382121 |
| Date | January 2018 |
| Creators | Podaný, Petr |
| Contributors | Sigmund, Marian, Mrňa, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0026 seconds