The aim of the thesis is to study mechanical properties of nanomaterials (multi-layer graphene, silicon, mica) suitable to be used as novel pressure sensors in laser photoacoustic spectroscopy. Membranes (diameter ~ 4 mm, thickness ~ 100 nm) were prepared by mechanical exfoliation method and then attached to a glass window in several slightly different designs. Movement of these membranes was detected using HeNe laser beam reflected from the membrane's surface onto a position sensitive detector. Methanol was used as a model gas and the signal was collected from studied element and microphone simultaneously. Acoustic wave, induced inside a measuring cell by periodic thermal variations, causes the membranes to move. The movement of a membrane is influenced by its mechanical properties, which is possible to determine by fitting the measured data into a mathematical model. Comparison of the output data of all membranes' measurements shows, that the signal intensity is influenced by the method of attaching membrane to a glass window and by volume of free space on a side of a membrane. Metallization of the membrane's surface (~ 70 nm) decreases its springiness thus decreases the sensitivity. Several membranes reached sensitivity comparable with top class microphone.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:342922 |
| Date | January 2015 |
| Creators | Vlasáková, Tereza |
| Contributors | Nesměrák, Karel, Wild, Jan |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds