This study examines the use of SS7 signaling system over IP networks by using the open source PBX YATE. At first it starts with describing the SS7 followed by an explanation of the function of each of its levels and the messages that are used within the SS7 network. The study then sheds some light on the ways of using SS7 inside IP network with the use of some protocols. It also discusses the architecture of YATE and its files, and how it is installed in Linux operating system. Finally, it describes the important files for delivering this task. The study was commenced by using two virtual machines that have two different open source PBX's which are YATE and Asterisk, and after acquiring some results by establishing communication between them via the means of SIP trunk, furthermore the study was extended to the laboratory in order to test it over real servers that have TDM cards, in order to apply the study by the means of SS7 protocols, SIGTRAN, MGCP gateway and SIP-T. The experiments have almost delivered successful communications after conducting a configuration for the files on multiple sides.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219912 |
| Date | January 2013 |
| Creators | Al-Anqari, Mhannad |
| Contributors | Novotný, Vít, Šilhavý, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds