Return to search

A multi-mode microwave cavity resonator

Most multi-mode microwave cavity filters exhibit insertion-loss characteristics which deviate widely from the theoretical responses on the low frequency side of the passband. This paper describes an X-band three-mode filter which inherently overcomes the primary cause of the response discrepancy. The design includes a method of identification of the field configurations within the cavity and a method of relating the coupling produced between two degenerate modes of resonance by a probe to the relative frequency shift caused by the probe. A simple method of measuring insertion loss is shown, and both theoretical and measured insertion loss characteristics are recorded for three bandwidths, 7.4 mc/s, 10.0 mc/s, and 13.6 mc/s, all of which show no extreme discrepancy between the theoretical and measured responses. / Applied Science, Faculty of / Electrical and Computer Engineering, Department of / Graduate

Identiferoai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/38868
Date January 1963
CreatorsFall, Stewart Temple
PublisherUniversity of British Columbia
Source SetsUniversity of British Columbia
LanguageEnglish
Detected LanguageEnglish
TypeText, Thesis/Dissertation
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

Page generated in 0.0016 seconds