Master’s thesis deals with computational modeling of 3D printing process done by FDM method made from PETG material using finite element method. Research section contains a brief description of 3D printing process modeling possibilities using finite element method and summarizes fundamental mechanical properties of thermoplastics. In practical section there is an evaluation of specimens printed of PETG material tensile tests. Further there is performed a sensitivity analysis of various influences on vertical imperfection of printed part Idler and is done its design modification, which is based on results of this analysis.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:418192 |
| Date | January 2020 |
| Creators | Michálek, Mojmír Cyril |
| Contributors | Halama, Radim, Vosynek, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0056 seconds