This diploma thesis deals with the analysis and design optimization of a speaker cabinet (enclosure) produced by the additive technology of 3D sand printing. The introductory part is devoted to the theory, both in the field of noise, vibration and the method of their calculations, as well as the theory of speakers and their systems. Numerical and experimental modal analysis is performed, which were compared to determine the mechanical properties of the new material, including material damping. This is followed by experimental and numerical harmonic analysis, with output in the form of a numerical model describing the behaviour of the structure during its excitation. The data are compared with a modal analysis of the internal acoustic space and the critical shapes and their frequencies are determined. At the end of the work, construction modifications are proposed to increase the rigidity of enclosures, the influence of which is evaluated on the created numerical models.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:432589 |
Date | January 2020 |
Creators | Kůst, Martin |
Contributors | Prokop, Aleš, Řehák, Kamil |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds