This master’s thesis is focused on the construction design of one-girder bridge crane for the LUVE – PLAST company. Construction design of the crane was developed in cooperation with the K-TECHNIK company, which carried out the production and installation of the crane bridge and the crane runway. The basic required parameters of the crane are: load capacity 8 000 kg, range 16 900 mm, minimum lift 4 650 mm. The crane, which construction is proposed in this thesis will be used for the exchange of forms of injection molding machines. The forms weight is about 7 000 kg. The aim of this work was to create a technical report with an analysis of construction choices solution with important technical and strength calculations. Calculations were made according to the Czech state standards and the literature dealing with the construction of bridge cranes. Further, the strength check of selected parts was made.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231243 |
| Date | January 2014 |
| Creators | Malár, Martin |
| Contributors | Malach, František, Malášek, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds