Fluoride, the most abundant form of fluorine, is an ion released into the environment, mainly via anthropogenic sources and erosion of mineral rocks. Although the element is well known for its health benefits on teeth and bones, it can as well be a harmful pollutant. In some areas on earth, the population can not obtain drinking water that is below the guideline limits of fluoride, which is set to 1.5 mg/L by the world health organization (WHO). Therefore there is a relevance to develop methods that can clean the waters from excess fluoride. The potential problems when it comes to finding these types of methods is that they can be expensive. However, materials generated as residues in industrial processes may be low in cost. In this thesis, silicon reduced AOD-slag, a material generated as a by-product from the production of stainless steel, was examined by its fluoride adsorption behavior and adsorption capacity. The concentrations of fluoride were measured with ion chromatography (IC) and the concentration of metals were analyzed with microwave plasma atomic emission spectroscopy (MP-AES). Additionally pH and conductivity were measured. The functionality of the material surface was analyzed with isotherm modeling, where the Sips isotherm model was tested. Moreover, optimization of the slag was performed by heat treating the material, as well as a sorption kinetics test on both optimized and original slags. The results from the analysis indicated that the material corresponds well to the Sips isotherm. Considering this result it is suggested that at low concentrations, the surface can be characterized as heterogeneous, with different binding energies at different available sites. At higher concentrations the Sips-model explains the surface to be saturated when a monolayer of fluoride is formed. Therefore the binding on the slag surface can be described to have an inner-sphere and covalent character. The metal analysis showed that calcium ions are released from the slag when in aqueous solutions. The presence of calcium in the liquid samples are believed to result in formations of solid calcium fluoride (CaF2), precipitated on the slag surface. Lastly, the maximum fluoride removal is believed to differ between different types of AOD-slag, where there as well are possibilities to optimize the material.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:oru-99725 |
| Date | January 2022 |
| Creators | Bernheim, Fredrik |
| Publisher | Örebro universitet, Institutionen för naturvetenskap och teknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0031 seconds