This dissertation thesis focuses on the evaluation of modern machine tools, especially tools for finishing operations, with which the effect of the passive force components on the machining process is evaluated. The thesis will examine the analysis of creating chips and circumstances that accompany this process and substantially involve the formation of a new surface. The analysis of the process of the recording of the power load of the MT3 tool takes place in the experimental part of the thesis. MT3 is a reaming head intended for finishing holes at high cutting speeds (100-200 m.min-1) with removal of small cross section AD (0.024 mm2) chips. Particular attention is paid to the newly created profile from the surface after machining and evaluation of changes in geometry and loading of the cutting edge, which is significantly reflected in the establishment and the development of passive forces.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234190 |
| Date | January 2013 |
| Creators | Slaný, Martin |
| Contributors | Janáč, Alexander, Bumbálek, Bohumil, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds