Ph.D. thesis is focused on the design of the method for simulation of energy demands of machine tool in operation at the stage of its development. Proposed method is developer on the basis of literature search in science and in industry. The method itself is composed of five related steps, that must be realised in the proper order in order to create a relevant energy profile of a machine tool. The output from the method are simulated data providing a course of comsumed energy and required power which are time dependent. Output data are obtained on the basis of the drive system simulation of machine tool through G-code, that is interpreted for simulation by the compiler into the matrix. It contains data necessary for controlling of machine tool, such as the required end points of the tool and required feed rates, to which is assigned a time value. G-code is partially time parametrized. It is then followed by full time parametrization through a of mathematical model of drive mechanisms and due the synergy of software for drive mechanisms control (Matlab Simulink) and software for physical simulation (MSC Adams) is processed into output data. As an input parameter figures also coefficient used as multiplier of the normal force of driving mechanisms, which is a function of feed rate. This loss function is obtained experimantally. In the context of Ph.D. thesis were conducted two experiments, used to verify the developed method. For each experiment is proceeded according to estabilished method and it is included a comparsion of simulation and measured data for various operating modes. The proposed method, described in the Ph.D. thesis, allows designers to summarize the energy demand of the proposed machine before its production. When correctly interpreted, the results of the method can serve as a basis for improving the energy profile and thereby increasing the energy efficiency of the machine tool.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:364597 |
| Date | January 2017 |
| Creators | Tůma, Jiří |
| Contributors | Demeč, Peter, Suchánek, Rostislav, Blecha, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds