For the transport of their spacecraft from the vehicle assembly building to the launch pads at Kennedy Space Centre, Florida, the National Aeronautics and Space Administration (NASA) is using two special crawler transporters since 1965. First developed for the Saturn V rocket the crawler transporters have been sufficient for all following generations of space ships so far. But for the new generation of Orionspacecraft which is under development now, a load capacity increase for the crawler transporter of plus 50% was necessary. For this task Hunger Hydraulik did develop new jacking, equalizing and levelling (JEL) cylinders with sufficient load capacity but also with some new features to improve the availability, reliability and safety of this system. After design approval and manufacture of the cylinders they have been tested in a special developed one-to-one scale dynamic test rig and after passing this the cylinders had to prove their performance in the crawler transporter itself. This article describes the general application and introduces the technical requirements of this project as well as the realized solution.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:14-qucosa-200569 |
| Date | 03 May 2016 |
| Creators | Rühlicke, Ingo |
| Contributors | Dresdner Verein zur Förderung der Fluidtechnik e. V. ,, Technische Universität Dresden, Fakultät Maschinenwesen |
| Publisher | Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:conferenceObject |
| Format | application/pdf |
| Source | 10th International Fluid Power Conference (10. IFK) March 8 - 10, 2016, Vol. 3, pp. 307-318 |
Page generated in 0.002 seconds