The subject of this diploma thesis is to design a new construction of the machinery, which is used for manipulation with tire carts in rubber industry. The reason for the new design is to eliminate the main shortcomings of the existing provision. The aim of this project was to elaborate an overview of the current designs of the handling equipment in question and to subsequently construct a new suitable design solution. In addition, several conceptual calculations were needed to be used in the selection of the appropriate electric motor, transmission, pneumatic cylinders and wiring. The relevant parts were designed using structural FEM analyses. The several variants of the solutions were considered for a suitable construction design. Based on these FEM simulations, the relevant parts have been modified in terms of geometry so that the resulting manipulating machinery meets all the criteria, especially regarding safety.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400871 |
| Date | January 2019 |
| Creators | Solař, Adam |
| Contributors | Dundálek, Radim, Ramík, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.271 seconds