Abstract My task was to prepare the already designed heating list “Stayhot” for manufacturing. I started with drawing the whole list in the CAD-program. It became obvious that some of the designed components had to be changed to work in practice. A turnable reflector couldn’t be combined with the isolation. The suggested light emitting diodes wouldn’t give enough light, so I cut them out and the problem with light remains to be solved. The old grating had many rods and I changed that to a grating with fewer rods to make it easier to clean. The hanging-up of the grating was also changed. The lower ceasing was changed to be closed towards the reflector to avoid filth and damp. The reflector had a different shape. From having been square it became oval to follow the shape of the above ceasing and have a more even isolation. It also opens up to the possibility to use two heating elements. The heating-source should have been changed to be warmer, but as the new elements didn’t come until my work was almost finished, I couldn’t use it.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-204 |
| Date | January 2006 |
| Creators | Radovic, Nebojsa |
| Publisher | Karlstads universitet, Institutionen för ingenjörsvetenskap, fysik och matematik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0021 seconds