Friction Stir Welding (FSW) offers an attractive alternative to conventional fusion welding processes because of the excellent properties (particularly ductility), reproducibility, robustness, and surface finished obtained with FSW. However, questions have been raised regarding the productivity of FSW against fusion welding methods. TWBs from the aluminum alloys 5754-H22 and 6181-T4 with different gauges (1 to 2 mm) are produced and tested. Welding speeds up to 10 m/min have been systematically investigated. The welds produced have been subjected to microstructural analysis, mechanical testing and formability analysis.
| Identifer | oai:union.ndltd.org:DUETT/oai:DUETT:duett-03312006-173958 |
| Date | 06 April 2006 |
| Creators | Sheikhi, Shahram |
| Contributors | Prof. Dr.-Ing. Alfons Fischer, Prof. Dr.-Ing. Karl-Heinz Schwalbe |
| Publisher | Gerhard-Mercator-Universitaet Duisburg |
| Source Sets | Dissertations and other Documents of the Gerhard-Mercator-University Duisburg |
| Language | German |
| Detected Language | English |
| Type | text |
| Format | application/pdf, text/html |
| Source | http://www.ub.uni-duisburg.de/ETD-db/theses/available/duett-03312006-173958/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. Hiermit erteile ich der Universitaet Duisburg das nicht-ausschliessliche Recht unter den unten angegebenen Bedingungen, meine Dissertation, Staatsexamens- oder Diplomarbeit, meinen Forschungs- oder Projektbericht zu veroeffentlichen und zu archivieren. Ich behalte das Urheberrecht und das Recht das Dokument zu veroeffentlichen und in anderen Arbeiten weiterzuverwenden. |
Page generated in 0.0049 seconds