Return to search

A influência da mecanossíntese na estabilização da fase tipo NaZn13 nos compostos [La0,95(RE)0,05]Fe11,4Si1,6 (RE = Y OU Gd)

Made available in DSpace on 2016-12-23T14:20:02Z (GMT). No. of bitstreams: 1
andre luiz alves pre-textual.pdf: 117556 bytes, checksum: 76d3afbdf37ad33e26738ca777741be3 (MD5)
Previous issue date: 2010-10-30 / We have studied the stabilization of NaZn13 phase in the intermetallic compound of generic composition LaFe11,4sp1,6 (sp = Si, Al). This stabilization was investigated through the partial substitution of Fe by atoms of Al and Si, and trough the substitution of La by Y or Gd, which are rare earths elements with no orbital contribution to the magnetic moments. We have chosen to study the compounds with stoichiometry LaFe11,4sp1,6 (sp = Al, Si), with y = 0,88, for which compounds are metamagnetic. We firstly studied NaZn13 phase formation in some mixed compounds of composition LaFe11,4(AlxSi1-x)1,6 (0 less or equals x less or equals 1), prepared using an electric arc furnace. The compounds were characterized by Mössbauer Spectroscopy, X Rays Diffraction and Energy Dispersive X Ray Spectroscopy. Some compositions have a predominant NaZn13 phase, while in other regions the fraction of the NaZn13 phase is relative small due to the presence of other phases formed by segregation. We have also investigated the partial substitution of La atoms by atoms of Y and Gd, in the following compounds La1-x(RE)xFe11,4Si1,6 (RE = Gd or Y), with x= 5%. This substitution doesn t modify significantly the stabilization of the NaZn13 phase compared to the non-substituted compound and the fraction of the segregated a-Fe phase is maintained around 50%. We have used a new procedure using the mechanical alloying to prepare LaFe11,4Si1,6 compounds. It consists in submitting the melted sample to a 0.5 to 1 hour long high energy ball milling process and then in annealing the sample. The process induced a significant reduction of the rich-Fe phase formation compared to a conventional process. Therefore, the process allows to obtain samples with a higher fraction of the desired NaZn13 phase. Therefore, the process allows obtaining samples with a higher fraction of the desired NaZn13 phase. / Neste trabalho foi estudada a estabilização da fase tipo NaZn13 no composto intermetálico LaFe11,4sp1,6 (sp = Si, Al). Essa estabilização foi investigada através da substituição parcial de átomos de Fe por átomos de Al e Si, além da substituição parcial de La por Y ou Gd, que são terras-raras com contribuição orbital nula para o momento
magnético. Particularmente, foram escolhidos os compostos com fórmula estequiométrica La[Feysp1-y]13 , com y = 0,88, devido seu caráter metamagnético. Foi inicialmente estudada a formação da fase tipo NaZn13, nos compostos mistos
LaFe11,4(AlxSi1-x)1,6 (0 menor ou igual x menor ou igual 1), através da fusão em arco voltaico. Esses compostos foram caracterizados pelas técnicas experimentais de: espectroscopia Mössbauer, difração de raios X e espectroscopia por dispersão de energia. Em algumas regiões de composição, os compostos mistos apresentam a fase NaZn13 majoritária. Em outras regiões de composição, a quantidade da fase tipo NaZn13 é relativamente pequena, se comparado com as demais fases formadas nos processos de segregação. Em seguida, foi investigada a substituição parcial de La por átomos de Y e Gd, ou seja, foram estudados os compostos La1-x(RE)xFe11,4Si1,6 (RE = Y ou Gd) com x = 5%. Os resultados sugerem que esta substituição não provoca mudança significativa na estabilização da fase tipo NaZn13 nos compostos a base de Si, ou seja, independentemente do dopante a fração das fases segregadas ricas em Fe é de aproximadamente 50%. Finalmente, foi usada a técnica de mecanossíntese (ou moagem em altas energias) para propiciar a estabilização de uma maior fração da fase tipo NaZn13, nos compostos a base de Si, já que estes apresentam maiores segregações de Fe e possuem grande potencial para aplicação tecnológica em refrigeradores que usam o efeito magnetocalórico. Assim, as amostras foram fundidas e submetidas à mecanossíntese por 0,5 - 1 hora em um moinho da marca SPEX8000 e depois tratada termicamente. Os resultados estão mostrando significativa redução da fase bcc-Fe segregada, conseqüentemente um aumento da fração da fase tipo NaZn13.

Identiferoai:union.ndltd.org:IBICT/oai:dspace2.ufes.br:10/6288
Date30 October 2010
CreatorsAlves, André Luiz
ContributorsLarica, Carlos, Nunes Filho, Evaristo, Sommer, Rubem Luis, Caetano, Edson Passamani
PublisherUniversidade Federal do Espírito Santo, Programa de Pós-Graduação em Física, UFES, BR, Física
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguagePortuguese
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formattext
Sourcereponame:Repositório Institucional da UFES, instname:Universidade Federal do Espírito Santo, instacron:UFES
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0026 seconds