The main objective of this investigation is to examine how various material properties, governed by code specification, affect the seismic response of a twelve- story reinforced concrete building. This study incorporates the pushover and response history analysis to examine how varying steel yield strength (Fy), 28 day nominal compressive concrete strength (f’c), modes, and ground motions may affect the base shear capacity and displacements of a reinforced concrete structure.
Different steel and concrete strengths were found to have minimal impact on the initial stiffness of the structure. However, during the post-yielding phase, higher steel and concrete compressive strengths resulted in larger base shear capacities of up to 22%. The base shear capacity geometric median increased as f’c or Fy increased, and the base shear capacity dispersion measure decreased as f’c or Fy increased. Higher mode results were neglected in this study due to non-convergent pushover analyses results.
According to the response history analysis, larger yield and concrete compressive strengths result in lower roof displacement. The difference in roof displacement was less than 12% throughout. This displays the robustness of both analysis methods because material properties have insignificant impact on seismic response. Therefore, acceptable yield and compressive strengths governed by seismic code will result in acceptable building performance.
| Identifer | oai:union.ndltd.org:CALPOLY/oai:digitalcommons.calpoly.edu:theses-1722 |
| Date | 01 December 2011 |
| Creators | Leung, Colin |
| Publisher | DigitalCommons@CalPoly |
| Source Sets | California Polytechnic State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Master's Theses |
Page generated in 0.0027 seconds