Made available in DSpace on 2014-12-17T14:06:56Z (GMT). No. of bitstreams: 1
EugenioOO_DISSERT.pdf: 4689753 bytes, checksum: 3bf8e997d1b94d1858f0a0c5652f05b0 (MD5)
Previous issue date: 2010-11-19 / Pipelines for the transport of crude oil from the production wells to the collecting
stations are named production lines . These pipes are subjected to chemical and
electrochemical corrosion according to the environment and the type of petroleum
transported. Some of these lines, depending upon the composition of the fluid
produced, may leak within less than one year of operation due to internal corrosion.
This work aims at the development of composite pipes with an external protecting
layer of high density polyurethane for use in production lines of onshore oil wells,
meeting operational requirements. The pipes were manufactured using glass fibers,
epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes
were produced by filament winding with the deposition of high density polyurethane
on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes
were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer
and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an
external polyurethane layer. The three samples were characterized by Scanning
Electronic Microscopy (SEM) and for the determination of constituent content. In
addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime
failure pressure, Gardner impact, transverse stiffness and axial tension. Field
tests were conducted in Mossor? RN (BRAZIL), where 1,677 meters of piping were
used. The tests results of the three types of pipes were compared in two events: after
two months from manufacturing of the samples and after nine months of field
application. The results indicate that the glass/epoxy pipes with an intermediate layer
of fiber glass composite, polyester e sand and with an external layer of high density
polyurethane showed superior properties as compared to the other two and met the
requirements of pressure class, axial tensile strength, transverse stiffness, impact
and environmental conditions, for onshore applications as production lines / As tubula??es para transporte de petr?leo dos po?os de produ??o at? a esta??o
coletora s?o denominadas de linhas de surg?ncia . Essas tubula??es est?o sujeitas
? corros?o qu?mica e eletroqu?mica, de acordo com o ambiente e os tipos de
petr?leo. Algumas dessas linhas, a depender da composi??o do petr?leo produzido
falham, ?s vezes, com menos de um ano de opera??o, devido ? corros?o interna
severa. Este trabalho objetiva o desenvolvimento de tubula??o em comp?sito
revestida externamente com poliuretano de alta densidade, para aplica??o em linhas
de surg?ncia de po?os de petr?leo onshore e que atenda ?s exig?ncias
operacionais. Neste desenvolvimento foram empregados fibra de vidro, resina ep?xi,
resina poli?ster, areia quartzosa e poliuretano (PU) de alta densidade. Os tubos
foram produzidos pelos processos de enrolamento filamentar com deposi??o de PU
na superf?cie externa e extremidades com rosca moldada (API 15 HR e PM-VII).
Foram produzidas tr?s concep??es de tubos: vidro/ep?xi sem revestimento,
vidro/ep?xi revestido com poliuretano de alta densidade e vidro/ep?xi coberto por um
composto de fibra de vidro, poli?ster e areia, revestido externamente com
poliuretano de alta densidade. Amostras das tr?s concep??es foram caracterizadas
atrav?s da t?cnica de Microscopia Eletr?nica de Varredura (MEV), da determina??o
do teor de vidro e resina, dos ensaios de rigidez e tra??o axial e dos testes
hidrost?ticos, ruptura instant?nea, press?o de curta dura??o e impacto Gardner.
Essa nova tecnologia foi testada no campo de produ??o em Mossor? RN, nos
quais foram instalados 1.677 metros de tubos. Assim, os resultados dos ensaios e
testes das tr?s concep??es de tubos foram comparados entre si em dois eventos:
ap?s dois meses da fabrica??o das amostras e ap?s nove meses da aplica??o dos
tubos em campo. Os dados indicaram que o tubo em comp?sito vidro/ep?xi,
poli?ster e areia, revestido externamente com poliuretano de alta densidade ,
apresentou melhores resultados quando comparado aos outros dois, podendo ser
usado na ind?stria de petr?leo em aplica??es onshore , como uma alternativa para
a aplica??o em linhas de surg?ncia, atendendo ?s exig?ncias de classe de press?o,
resist?ncia ? tra??o axial, rigidez, impacto e intemp?ries
Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/12699 |
Date | 19 November 2010 |
Creators | Oliveira, Eugenio Onofre de |
Contributors | CPF:46660640444, http://lattes.cnpq.br/6572298923055649, Nascimento, Rubens Maribondo do, CPF:80732810400, http://lattes.cnpq.br/8671649752936793, Meniconi, Luiz Cl?udio de Marco, CPF:42652928600, http://lattes.cnpq.br/8033139324130415, Paskocimas, Carlos Alberto, Melo, Jos? Daniel Diniz |
Publisher | Universidade Federal do Rio Grande do Norte, Programa de P?s-Gradua??o em Ci?ncia e Engenharia de Materiais, UFRN, BR, Processamento de Materiais a partir do P?; Pol?meros e Comp?sitos; Processamento de Materiais a part |
Source Sets | IBICT Brazilian ETDs |
Language | Portuguese |
Detected Language | English |
Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
Format | application/pdf |
Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0019 seconds