Nowadays the attention to the utilization of secondary raw materials as a component of building materials is being paid to in the Czech Republic and in the world. This thesis deals with possibilities of using secondary raw materials as partial cement substitutes in industrial floors. The aim of this thesis is to verify the influence of cement substitution amount with secondary raw materials and their fineness of grinding on the properties of the floor surface in time and on its structure. On the basis of the acquired knowledge, the influence of the pre-treatment of the secondary raw material on the properties of the floor ceiling with an emphasis on the economic aspect was assessed. After evaluating the results, some substitution of cement in the floor screed with secondary raw materials is beneficial. The significant influence of more intensive milling of the floor screeds base on the parameters of the final floor screed was not confirmed. It seems, that it is possible to achieve very good results even when using secondary raw materials with a lower percentage of fine particles. This brings together the economic benefits of lowering the cost of a lower dose of expensive cement by using cheaper secondary raw materials, because pre-treatment of such materials does not require the use of a large amount of energy.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:371877 |
| Date | January 2018 |
| Creators | Figala, Petr |
| Contributors | Dohnálek,, Pavel, Drochytka, Rostislav |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0025 seconds