The goal of this thesis was the verification of the advanced time-dependent elasto-plastic material model for modeling diaphragm walls. Currently, this type of construction is solved usually with a combination of linear-elastic volume and plate elements. To express time-dependent behaviour, there are both, volume and plate, elements active in short-term conditions, then only volume elements in long-term conditions, while plate elements are deactivated. In this thesis, the Shotcrete material model, which can capture the time-dependent behaviour without combining two types of construction elements, is used. First, a theory of time-dependent behaviour is presented and a design of concrete structures by Eurocode 2 is discussed. Next, the Shotcrete material model is described, then used for modeling a biaxial test and calibration of compression and bending test. Following the gained knowledge, a real boundary value problem of deep excavation supported by diaphragm walls with the strut was solved. To calculate values of the internal forces and horizontal deformation in diaphragm walls, three types of material models are used.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:455389 |
| Date | January 2022 |
| Creators | Šindelářová, Daniela |
| Contributors | Kotačková, Alena, Chalmovský, Juraj |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds