Computer simulation using the Discrete Element Method (DEM) has emerged as a powerful tool in studying the behaviour of particulate systems during powder flow and compaction. Contact law between particles is the most important input to the Discrete Element simulation. However, most of the present simulations employ over-simplistic contact laws which cannot capture the real behaviour of particulate systems. For example, plastic yielding, material brittleness, sophisticated particle geometry, surface roughness, and particle adhesion are all vitally important factors affecting the behaviour of particle interactions, but have been largely ignored in most of the DEM simulations. This is because it is very difficult to consider these factors in an analytical contact law which has been the characteristic approach in DEM simulations. This thesis presents a strategy for obtaining the contact laws numerically and a comprehensive study of all these factors using the numerical approach. A numerical method, named as the Material Point Method (MPM) in the literature, is selected and shown to be ideal to study the particle interactions. The method is further developed in this work in order to take into account all the factors listed above. For example, to study the brittle failure during particle impact, Weibull’s theory is incorporated into the material point method; to study the effect of particle adhesion, inter-atomic forces are borrowed from the Molecular Dynamic model and incorporated into the method. These developments themselves represent a major progress in the numerical technique, enabling the method to be applied to a much wider range of problems. The focus of the thesis is however on the contact laws between extremely fine particles. Using the numerical technique as a tool, the entire existing theoretical framework for particle contact is re-examined. It is shown that, whilst the analytical framework is difficult to capture the real particle behaviour, numerical contact laws should be used in its place.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:495708 |
| Date | January 2009 |
| Creators | Li, Fan |
| Contributors | Pan, Jingzhe ; Sinka, Csaba |
| Publisher | University of Leicester |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/2381/4494 |
Page generated in 0.0019 seconds