Return to search

The influence of elemental partitioning on hardness in a 12% chromium dual-phase steel

Bibliography: pages 96-102. / During the annealing treatment in the production of dual phase steels, partitfoning of alloying elements can occur depending on competitive solubility in the ferrite and austenite for the specific partitioning species. An investigation of the partitioning of substitutional elements was considered paramount in understanding certain anomalies that had been identified by previous researchers in various studies of a dualphase 12% Chromium steel, designated 3CR12. These anomalies concerned observed increases in bulk hardness that could not be attributed to changes in the volume fraction of martensite produced after exposure to a range of temperatures within the dual phase field. Subsequent experiments revealed an unexpected increase in the microhardness of the martensite phase prOduced by heat treatment in the temperature range of interest. In this thesis conventional analytical measurements using Energy dispersive X-ray analysis facilities attached to a Scanning Electron microscope have been utilised to determine the compositions of the two phases in the alloy. A range of temperatures in the dual phase region have been investigated at holding durations of 1, 4 and 20 hours. It was found that partitioning of substitutional elements was occurring, however no changes were observed as a function of holding time. Further empirical data was obtained using dilatometric methods. This strongly suggested that interstitial concentrations were increasing as a function of annealing time and clarified the anomalies observed during previous studies on 3CR12. Further study includes that of substitutional element partitioning in the prior states of the commercially produced hot-rolled and annealed 3CR12 alloy. These include the as cast slab and the hot-rolled slab, as well as the final hot-rolled and annealed slab. Segregation was found to occur in the as cast slab. Subsequent investigation showed the presence of δ-ferrite in the final processing stages of the hot-rolled and annealed product.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/22213
Date January 1990
CreatorsPhilcox, Ann E
ContributorsShaw, Martin
PublisherUniversity of Cape Town, Faculty of Engineering and the Built Environment, Centre for Materials Engineering
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeMaster Thesis, Masters, MSc (Eng)
Formatapplication/pdf

Page generated in 0.0016 seconds