Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2004. / Includes bibliographical references (p. 33-34). / Ferromagnetic shape memory alloys (FSMAs) are a class of alloys that exhibits the shape memory effect, as in the alloy nickel-titanium, sometimes known as Nitinol. In FSMAs, though, the shape changes are not brought on just by changes in temperature or mechanical stresses, but can also be driven by the application of a relatively small magnetic field. The large strains exhibited by such materials are a result of the coexistence of several features, including a thermoelastic martensitic transition, and a ferromagnetic martensite (non-equilibrium, low-temperature) phase. The magnetocrystalline anisotropy must also be large, as seen in similar alloys such as iron-palladium (Fe₇₀Pd₃₀) [1]. Nickel-manganese-gallium is an FSMA that has shown up to 10% strain in certain orientations as an effect of unconstrained magnetic actuation [4]. To achieve cyclic actuation in FSMAs, the field-induced extension has conventionally been reversed by a compressive mechanical stress from a spring or field orthogonal to the actuating field. The use of a second FSMA crystal to provide the reset force was unreported. Collinear single crystals are shown here to be able to induce a 2.8% reset strain against one another when subjected alternately to individual pulsed magnetic fields in a custom designed and constructed apparatus. A setup of this type could be used in a bistable microswitch, linear motion actuator, or shutter controller where a low actuation stress is sufficient or the electrical contacts required to activate a piezoelectric device are undesirable. / by Catherine A. Jenkins. / S.B.
| Identifer | oai:union.ndltd.org:MIT/oai:dspace.mit.edu:1721.1/32717 |
| Date | January 2004 |
| Creators | Jenkins, Catherine A. (Catherine Ann), 1981- |
| Contributors | Samuel M. Allen and Robert C. O'Handley., Massachusetts Institute of Technology. Dept. of Materials Science and Engineering., Massachusetts Institute of Technology. Dept. of Materials Science and Engineering. |
| Publisher | Massachusetts Institute of Technology |
| Source Sets | M.I.T. Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | 34 p., 1177750 bytes, 1176987 bytes, application/pdf, application/pdf, application/pdf |
| Rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission., http://dspace.mit.edu/handle/1721.1/7582 |
Page generated in 0.002 seconds