Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2009. / This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections. / Cataloged from student submitted PDF version of thesis. / Includes bibliographical references. / Monolayer patterns of block copolymer (BCP) microdomains have been pursued for applications in below sub-30 nm nanolithography. BCP selfassembly processing is scalable and low cost, and is well-suited for integration with existing semiconductor fabrication techniques. The two critical issues are how to obtain reliable long-range ordering of features with minimum defect densities and how to successfully transfer the patterns into other functional materials. Exceptionally well-ordered and robust nanoscale patterns can be made from poly(styrene-b-dimethylsiloxane) (PS-PDMS) BCPs, which have a very large Flory-Huggins interaction parameter between the blocks compared to other commonly used BCPs. Cylinder- or sphere-forming BCP films were spincoated over silicon substrates patterned with shallow steps using optical lithography or nanoscale posts made by electron-beam lithography, and solvent-annealed to induce ordering. This generates patterns with a correlation length of at least several micrometers. The annealed film was treated with plasma to obtain oxidized PDMS patterns with a lateral dimension of 14 - 18 nm. These can be used as an etch mask or an easily removable template for patterning functional materials. Solvent vapor treatments can tune the pattern dimension and morphology. Different degrees of solvent uptake in BCP films during solvent-annealing can manipulate the interfacial interaction between the two blocks, and a mixed solvent vapor can change the effective volume fraction of each block. The self-assembled patterns can be transferred into various kinds of functional materials. / (cont.) For example, arrays of parallel lines were used as a mask to pattern poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) conducting polymer thin films. The resulting PEDOT:PSS nanowire array was used as an chemiresistive-type ethanol-sensing device. Metallic films such as Ti, Pt, Ta, W, and magnetic Co and Ni were structured using a pattern-reversal process. Coercivity enhancements were observed for the fabricated ferromagnetic nanostructures such as wires, rings, and antidots. These functional nanostructures can be utilized for a variety of devices such as high-density and high performance sensor or memory devices. / by Yeon Sik Jung. / Ph.D.
| Identifer | oai:union.ndltd.org:MIT/oai:dspace.mit.edu:1721.1/52791 |
| Date | January 2009 |
| Creators | Jung, Yeon Sik |
| Contributors | Caroline A. Ross., Massachusetts Institute of Technology. Dept. of Materials Science and Engineering., Massachusetts Institute of Technology. Dept. of Materials Science and Engineering. |
| Publisher | Massachusetts Institute of Technology |
| Source Sets | M.I.T. Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | 171 p., application/pdf |
| Rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission., http://dspace.mit.edu/handle/1721.1/7582 |
Page generated in 0.0013 seconds