The aim of this thesis is to modify commercially produced drone DJI Matrice 100 and replace its original control unit by open source Pixhawk and its accessories. Subsequently, it deals with the selection of suitable open source firmware for Pixhawk and its configuration on the device. Another part is dedicated to the possibilities of using the Robotic Operating System (ROS) and its Mavros libraries on the onboard computer Raspberry Pi. By using Mavros, it examines the possibilities of drone flight control, both in the simulation environment and in the real environment.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442528 |
Date | January 2021 |
Creators | Hamáček, Vojtěch |
Contributors | Ligocki, Adam, Jílek, Tomáš |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0163 seconds