Return to search

Ripple Current Effect on Output Power of Solar Cell

This thesis investigates the effect of the ripple current on the output power of solar cells. A solar panel with several metal halide lamps is set up to emulate the photovoltaic power system, which is cascaded by a boost converter and a buck-boost converter to extract triangular and trapezoidal currents, respectively. All experiments are operated under the room temperature with different current ripples and frequencies. The measured current and voltage waveforms at the output powers indicate that the dynamic characteristics are very different from static ones obtained from the dc loads. It is found that the output voltage lags the current when the peak of the rippled current goes beyond the maximum power point (MPP), leading to a declination in the average output power. This phenomenon becomes more severe for a higher peak, lower frequency, and larger charge of the rippled current exceeding the MPP. In addition, the declination in the average power may cause a shift of the MPP.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0725112-145335
Date25 July 2012
CreatorsLin, Shin-Li
ContributorsTsai-Fu Lin, Yen-Hau Chen, Chih-Chiang Hua, Chin-Sien Moo, Jia-You Lee
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0725112-145335
Rightsuser_define, Copyright information available at source archive

Page generated in 0.0014 seconds