Return to search

Stargrazer One: A New Architecture for Distributed Maximum Power Point Tracking of Solar Photovoltaic Sources

The yield from a solar photovoltaic (PV) source is dependent on factors such as light and temperature. A control system called a maximum power point tracker (MPPT) ensures that the yield from a solar PV source is maximized in spite of these factors. This thesis presents a novel implementation of a perturb and observe (PO) MPPT.
The implementation uses a switched capacitor step down converter and a custom digital circuit implementation of the PO algorithm. Working in tandem, the switched capacitor step down converter and the custom digital circuit implementation were able to successfully track the maximum power point of a simulated solar PV source. This implementation is free of the overhead encountered with general purpose processor based MPPT implementations. This makes this MPPT system a valid candidate for applications where general purpose processors are undesirable.
This document will begin by discussing the current state of MPPT research. Afterward, this thesis will present studies done to be able to use the chosen switched capacitor step down converter. Then the digital circuit PO implementation will be discussed in detail. Simulations of the architecture will be presented. Finally, experimental validation using a hardware prototype will be shown.

Identiferoai:union.ndltd.org:uky.edu/oai:uknowledge.uky.edu:ece_etds-1081
Date01 January 2015
CreatorsMunoz-Coreas, Edgard
PublisherUKnowledge
Source SetsUniversity of Kentucky
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations--Electrical and Computer Engineering

Page generated in 0.0019 seconds