The aim of this diploma thesis is to introduce a construction and controlling of the EC motor. On a base of knowledge make up a EC motor model in Matlab Simulink, with a position scanning providing by Hall probe. The EC motor model should be with its behavior close to the real EC motor as much as possible. There were a given requirements on the motor. On the base of those requirements was chosen a real EC motor. Its catalog values were put in the EC motor model in Matlab and the results were compared with real data. Next task was to design a real controlling driver of EC motor, which should has a minimal size. This driver was constructed and thermal test was made a on given load.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:317120 |
| Date | January 2017 |
| Creators | Štajner, David |
| Contributors | Červinka, Dalibor, Pazdera, Ivo |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds